Search

For flattenting and deburring the wire ends. Perfect forged and hardened. 6 x 6 x 2,3 cm

Orthosis Nail Correction uses flat, pliable spring clips that do not require a centre loop / omega to correct them.

Length 12 cm, pointed / smooth For adjusting the brace to the body of the nail and for bending the end-loops. For ORTOGRIP and GOLDSTADT braces, spring braces and brace wire up to 0.5 mm thick.

For holding wire braces, especially when tapping in the end-loops. Highest quality stainless steel, with extra-compacted surface

Plaster Bowl made of natural rubber for mixing plaster.

For sliding the GOLDSTADT professional or Spring Brace into position and distributing the nail mass.

The 'golden age' for professional nail correction. The GOLDSTADT professional Classic for individually cutting to size. Stainless steel, gold-plated for optimum adhesion and anti-allergenic properties, 4 strips each 100 mm long, 3 mm wide and just 0.1 mm thick have everything they need for effective application. 4 pcs, 100 mm long

For fixing the Goldstadt Brace to the body of the nail. The gel-like consistency prevents run-off and gives quick hardening times of just a few seconds.

Spatula for stirring and distributing the nail mass and for building up plaster models.

Spatula for mixing plaster, silicone or hot wax. 20 cm long

Fine, angled spatula with many applications. 17,5 cm long

Length 14 cm, short / smooth For adjusting the brace to the body of the nail and for bending the end-loops. Suitable for all wire thicknesses.

Length: 13.5 cm, jaws short / grooved For adjusting the brace to the body of the nail and for bending and pressing the end-loops together.

Helpful when adjusting the clasp to the nailform

Material residues can be removed easily after usage of the bowl.

12,5/12,5 cm Prefabricated nail plate made of transparent plastic. With cold formable material, it is easy to prepare a fitting nail plate with scissors and round- nosed pliers.

Combines the functions of a wire cutter, round and flat-nosed pliers and step nippers in one instrument. 14 cm long

14 cm long Many applications, specially for the removal of nail corners that have been cut off

Length 11 cm, pointed Special design for adjusting the loop and bending it into the so-called submissive position. The wire thicknesses over 0,4 mm need to be prepared in the cone of the pliers.

Length 13 cm, pointed Extremely pointed (tip diameter, approx. 0.5 mm). For the finest work on nail correction, specially for bending end-loops with small radius and for processing the end of the VHO-Osthold brace. Suitable for all wire thicknesses. With reset spring.